Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester
Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional Features: data hold, max reading, and an easy to read large LCD
Portable: comes with a handy carrying pouch, perfect for use while you're on the goSleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
Main functions:
AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.
NCV:
Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.
HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.
Wide range of applications: car repair, industrial circuit inspection, home circuit check.
Specification:
Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
Display: True RMS, 6000 counts, 3 5/6 digits
Overload Display: Display OL
DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)
Package Content:
1 x HT118A Multimeter
1 x Test Leads
2 x AA Battery
1 x User Manual
1x Thermocouple